Displaying Dhcp Pool Configuration - Siemens S223 User Manual

UMN:CLI
8.8.1.17
246
The following is an example of displaying DHCP packet statistics.
SWITCH(config)# show ip dhcp server statistics
===========================================
Message
-------------------------------------------
DHCP DISCOVER
DHCP REQUEST
DHCP DECLINE
DHCP RELEASE
DHCP INFORM
=========================================
Message
-----------------------------------------
DHCP OFFER
DHCP ACK
DHCP NAK
SWITCH(config)#

Displaying DHCP Pool Configuration

To display a DHCP pool configuration, use the following command.
Command
show ip dhcp pool [POOL]
show ip dhcp pool summary
[POOL]
The following is an example of displaying a DHCP pool configuration.
SWITCH(config)# show ip dhcp pool summary
[Total -- 1 Pools]
Total 0
Available 0
Abandon 0
Bound 0
Offered 0
Fixed 0
[sample]
Total 0
Available 0
Abandon 0
Bound 0
Offered 0
Fixed 0
SWITCH(config)#
Recieved/Error(0/0)
0
0
0
0
0
Sent/Error(0/0)
0
0
0
Mode
Shows a DHCP pool configuration.
Enable
Global
Shows a summary of a DHCP pool configuration.
Bridge
POOL: pool name
0.00% of the pool
0.00% of the pool
0.00% of the pool
0.00% of the pool
0.00% of the pool
0.00% of the pool
SURPASS hiD 6615 S223/S323 R1.5
Description
0.00 of total
0.00 of total
0.00 of total
0.00 of total
0.00 of total
0.00 of total
0.00 of total
0.00 of total
0.00 of total
0.00 of total
0.00 of total
0.00 of total
A50010-Y3-C150-2-7619
User Manual