Software Installation; Nw8202 Ip Configuration Download Tool; Nw8202 Hardware Requirements; Nw8202 Software Requirements - Siemens NK8222 Installation, Function & Configuration

Ethernet port for a single subsystem, ethernet port, cei interface for a single subsystem, ethernet port for a single subsystem, modbus gateway
Table of Contents

Advertisement

Software installation

7
Software installation
7.1

NW8202 IP configuration download tool

7.1.1

NW8202 hardware requirements

7.1.2

NW8202 software requirements

7.1.3

NW8202 installation

42
Building Technologies
Fire Safety & Security Products
NK8000 software installation includes the following:
 Composer and related tools for system configuration
DMS8000 product setup
 Additional tools: NW8202 / NW8204
This section lists the hardware and software requirements for the NW8202 and
NW8204 tools, and details how to install them.
Note: The DMS8000 installation CD includes separate set-ups for the NW8202
and NW8204.
The NW8202 is used to download the IP configuration data to the target NK82xx
units. The NW8202 Tool allows a unique IP configuration to be assigned to the
NK82xx(s).
NW8202 should be installed on the PC used to send the IP configuration to the
NK82xxs prior to shipment, or remotely after shipment (usually the Technician's
PC).
 Pentium-class PC hardware or higher
 Ethernet network interface adapter (IEEE 802.3, 10Base-T or 100Base-TX)
 10 MB Free Disk Space
 128 MB RAM (recommended)
 Windows XP Professional or higher operating system
 Network Configuration including TCP/IP protocol
You can install the NW8202 tool when you install the DMS. You can also install it
separately on a different PC (such as a service PC) at a later time. If you are in-
stalling MK8000, you launch NW8202 by selecting the NW8202.exe file from the
following directory:
<InstallationDir>\Utilities\NW8202
For separate installation on a service PC, do the following:
1. Logon to computer as Administrator (for details ask network administrator)
2. Insert the Installation CD
3. Select the NK8000 - Support Tools folder
4. Select NW8202.exe
Install Shield Wizard opens
5. Follow the instructions in the Installation Wizard
048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
06.2011

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents