Port Security Aging - Siemens S223 User Manual

UMN:CLI
7.10.2
160
To display the configuration of port security, use the following command.
Command
show port security [PORTS]
This is an example of configuring port security on port 7.
SWITCH(config)# bridge
SWITCH(bridge)# port security 7
SWITCH(bridge)# port security 7 maximum 10000
SWITCH(bridge)# port security 7 violation protect
SWITCH(bridge)# port security 7 mac-address 00:02:a5:74:9b:17 vlan 1
SWITCH(bridge)# show port security 7
========================================================================
port security violation aging
========================================================================
7 enabled protect
========================================================================
port vlan secure-mac-addr
========================================================================
7 1 00:02:a5:74:9b:17
SWITCH(bridge)# no port security 7 maximum
SWITCH(bridge)# no port security 7 violation
SWITCH(bridge)# show port security 7
========================================================================
port security violation aging
========================================================================
7 enabled shutdown
========================================================================
port vlan secure-mac-addr
========================================================================
SWITCH(bridge)#

Port Security Aging

Port security aging is to set the aging time for all secure addresses on a port. Use this
feature to remove and add PCs on a secure port without manually deleting the existing
secure MAC addresses while still limiting the number of secure addresses on a port.
Command
port security PORTS
static
port security PORTS aging time
<1-1440>
port security PORTS aging type
{ absolute | inactivity }
absolute all the secure addresses on this port age out exactly after the time (min-
•
utes) specified lapses and are removed from the secure address list.
inactivity the secure addresses on this port age out only if there is no data traffic
•
from the secure source addresses for the specified time period.
Mode
Bridge Shows port security on the port.
type
- absolute
status
static
type
- absolute
status
Mode
aging
Enables aging for configured secure addresses.
Configures aging time in minutes for the port. All the
Bridge
secure addresses age out exactly after the time.
Configures aging type.
SURPASS hiD 6615 S223/S323 R1.5
Description
static maximum current
- 10000 1
in use
-
static maximum current
- 1 0
in use
Description
A50010-Y3-C150-2-7619
User Manual