Clearing Mrib Information - Siemens S223 User Manual

UMN:CLI
9.1.3
280

Clearing MRIB Information

Clearing Total or Partial Group Entry of MRIB
If you use the clear ip mroute command, the MRIB clears the multicast route entries in
its multicast route table, and removes the entries from the multicast forwarder. Each mul-
ticast protocol has its own clear multicast route command. The protocol-specific clear
command clears multicast routes from the protocol, and also clears the routes from the
MRIB.
To delete the multicast route entries, use the following command.
Command
clear ip mroute *
clear ip mroute GROUP-ADDR
[SRC-IP-ADDRESS]
Clearing Statistics of Multicast Routing Table
To delete the multicast route statistics entries from IP multicast routing table, use the fol-
lowing command.
Command
clear ip mroute statistics *
clear ip mroute statistics GROUP-ADDR [SRC-
IP-ADDRESS]
Clearing MFC and Tree Information Base which are produced by PIM-SM
To clear all Multicast Forwarding Cache (MFC) and TIB entries in the PIM-SM protocol
level, use the following command.
Command
clear ip mroute * pim sparse-
mode
clear ip mroute GROUP-ADDR
[SRC-IP-ADDRESS] pim sparse-
mode
SURPASS hiD 6615 S223/S323 R1.5
Mode
Deletes all multicast routes entries.
Enable
Deletes specific multicast routes entries.
Global
GROUP-ADDR: group IP address
Bridge
SRC-IP-ADDRESS: source IP address
Mode
Enable
Global
Bridge
Mode
Deletes all MFC and TIB entries in the PIM-SM.
Enable
Deletes specific MFC and TIB entries in the PIM-SM.
Global
GROUP-ADDR: group IP address
SRC-IP-ADDRESS: source IP address
User Manual
Description
Description
Deletes all multicast routes statistics
entries.
Deletes specific multicast routes statis-
tics entries.
GROUP-ADDR: group IP address
SRC-IP-ADDRESS: source IP address
Description
A50010-Y3-C150-2-7619