Table of Contents
Advertisement
User Manual
SURPASS hiD 6615 S223/S323 R1.5
8.12
A50010-Y3-C150-2-7619
Command
no storm-control { broadcast |
multicast | dlf } [PORTS]
To display a configuration of storm control, use the following command.
Command
show storm-control
Jumbo-frame Capacity
The packet range that can be capable to accept is from 64 bytes to 1518 bytes. Therefore,
packets not between these ranges will not be taken. However, the hiD 6615 S223/S323
can accept Jumbo-frame larger than 1518 bytes through user's configuration.
To configure to accept Jumbo-frame larger than 1518 bytes, use the following command.
Command
jumbo-frame
PORTS
9000>
To disable configuration to accept Jumbo-frame, use the following command.
Command
no jumbo-frame PORTS
To display the configuration of Jumbo-frame, use the following command.
Command
show jumbo-frame
Sample Configuration
The following is an example of configuration to accept Jumbo-frame under 2200 bytes in
port 1~10.
SWITCH# configure terminal
SWITCH(config)# bridge
SWITCH(bridge)# jumbo-frame 1-10 2200
SWITCH(bridge)# show jumbo-frame
Name : Current/Default
port01 :
Mode
Disables broadcast, multicast, or DLF storm control
Bridge
respectively.
Mode
Enable
Global
Displays storm control configuration.
Bridge
Mode
Configures to accept jumbo-frame between specified
<1518-
ranges.
Bridge
1518-9000: Max packet length
Mode
Disables configuration to accept jumbo-frame on speci-
Bridge
fied port.
Mode
Enable
Global
Shows a configuration of jumbo frame.
Bridge
2200/
1518
UMN:CLI
Description
Description
Description
Description
Description
275
Hide quick links:
Advertisement
Table of Contents
