User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.4.1.1
7.4.1.2
7.4.1.3
7.4.1.4
A50010-Y3-C150-2-7619
want to list available commands.
The following is an example of listing available commands on RMON Configuration mode.
SWITCH(config-rmonhistory[5])# ?
RMON history configuration commands:
active
data-source
do
exit
help
interval
owner
requested-buckets
show
SWITCH(config-rmonhistory[5])#
Source Port of Statistical Data
To specify a source port of statistical data, use the following command.
Command
data-source NAME
Subject of RMON History
To identify subject using RMON history, use the following command.
Command
owner NAME
Number of Sample Data
To configure the number of sample data of RMON history, use the following command.
Command
requested-buckets <1-65535>
Interval of Sample Inquiry
To configure the interval of sample inquiry in terms of second, use the following command.
Command
interval <1-3600>
Activate the history
Set data source port
To run exec commands in config mode
End current mode and down to previous mode
Description of the interactive help system
Define the time interval for the history
Assign the owner who define and is using the history
resources
Define the bucket count for the interval
Show running system information
Mode
Specifies a data object ID.
RMON
NAME: enters a data object ID. (ex. ifindex.n1/port1)
Mode
Identifies subject using related data, enter the name
RMON
(max. 32 characters).
Mode
Defines a bucket count for the interval, enter the num-
RMON
ber of buckets.
1-65535: bucket number (default: 50)
Mode
Defines the time interval for the history (in seconds),
RMON
enter the value. (default: 1800)
UMN:CLI
Description
Description
Description
Description
127