Fig. 5.2 Port Mirroring - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619
Port Mirroring
Fig. 5.2
To configure port mirroring, designate mirrored ports and monitor port. Then enable port
mirroring function. Monitor port should be connected to the watch program installed PC.
You can designate only one monitor port but many mirrored ports for one switch.
Step 1
Activate the port mirroring, using the following command.
Command
mirror enable
Step 2
Designate the monitor port, use the following command.
Command
mirror monitor {PORTS I cpu }
Step 3
Designate the mirrored ports, use the following command.
Command
mirror add PORTS [ ingress |
egress ]
Mode
Bridge Activates port mirroring.
Mode
Bridge Designates the monitor port.
Mode
Designates the mirrored ports.
Bridge ingress: ingress traffic
egress: egress traffic
UMN:CLI
Description
Description
Description
81