Disabling Snmp - Siemens S223 User Manual

UMN:CLI
7.1.11
!
118
To display a configured severity of alarm, use the following commands.
Command
show snmp alarm-severity
To deletes a recorded alarm in the system, use the following command.
Command
snmp clear alarm-history
The following is an example of showing the transmitted alarm and delete the records.
SWITCH(config)# show snmp alarm-history
cold-start
SWITCH(config)# snmp clear alarm-history
SWITCH(config)# show snmp alarm-history
SWITCH(config)#
To display a current alarm report, use the following command.
Command
show snmp alarm-report
To deletes a recorded alarm report in the system, use the following command.
Command
snmp clear alarm-report

Disabling SNMP

To disable SNMP feature, use the following command.
Command
no snmp
When you use the above command, all configurations concerning SNMP will be deleted.
Mode
Enable
Shows a configured severity of alarm.
Global
Mode
Enable
Deletes a recorded alarm in the system.
Global
minor Fri Mar 25 15:30:56 2005 System booted.
Mode
Enable
Shows a current alarm report.
Global
Mode
Enable
Deletes a recorded alarm report in the system.
Global
Mode
Global Disables SNMP feature.
SURPASS hiD 6615 S223/S323 R1.5
Description
Description
Description
Description
Description
A50010-Y3-C150-2-7619
User Manual