Command Line Interface (Cli); Command Mode - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5

3 Command Line Interface (CLI)

3.1
A50010-Y3-C150-2-7619
This chapter describes how to use the Command Line Interface (CLI) which is used to
configure the hiD 6615 S223/S323 system.
•

Command Mode

Useful Tips
•
Command Mode
You can configure and manage the hiD 6615 S223/S323 by console terminal that is in-
stalled on user's PC. For this, use the CLI-based interface commands. Connect RJ45-to-
DB9 console cable to the hiD 6615 S223/S323.
This chapter explains how CLI command mode is organized before installing. CLI
command mode is consisted as follow:
Privileged EXEC View Mode
•
Privileged EXEC Enable Mode
•
• Global Configuration Mode
Bridge Configuration Mode
•
Rule Configuration Mode
•
DHCP Configuration Mode
•
DHCP Option 82 Configuration Mode
•
Interface Configuration Mode
•
RMON Configuration Mode
•
• Router Configuration Mode
• VRRP Configuration Mode
Route-Map Configuration Mode
•
UMN:CLI
27