Packet Dump By Protocol; Packet Dump With Option - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.16.1.1
7.16.1.2
A50010-Y3-C150-2-7619

Packet Dump by Protocol

You can see packets about BOOTPS, DHCP, ARP and ICMP using the following com-
mand.
Command
debug packet { interface INTER-
FACE | port PORTS} protocol
{ bootps | dhcp | arp | icmp } { src-
ip A.B.C.D | dest-ip A.B.C.D}
debug packet { interface INTER-
FACE | port PORTS} host { src-ip
A.B.C.D | dest-ip A.B.C.D} { src-
port <1-65535> | dest-port <1-
65535>}
debug packet { interface INTER-
FACE | port PORTS} multicast
{ src-ip A.B.C.D | dest-ip A.B.C.D}
debug packet { interface INTER-
|
FACE port PORTS}
A.B.C.D | dest-ip A.B.C.D}
debug packet { interface INTER-
FACE | port PORTS} dest-ip
A.B.C.D

Packet Dump with Option

You can verify packets with TCP dump options using the following command.
Command
debug packet OPTION
Mode
Shows packet dump by protocol.
Shows host packet dump.
Enable
Shows multicast packet dump.
src-ip
Show packet dump by source IP address or destination
IP address.
Mode
Enable Shows packet dump using options.
UMN:CLI
Description
Description
175