External Routes To Ospf Network - Siemens S223 User Manual

Siemens single-board fast ethernet switch operators user manual
Table of Contents

Advertisement

User Manual
SURPASS hiD 6615 S223/S323 R1.5
10.2.12
A50010-Y3-C150-2-7619
To configure the period of finding, use the following command.
Command
timers
spf
SPF-DELAY
HOLD
To release the configuration, use the following command.
Command
no timers spf

External Routes to OSPF Network

If other routing protocol redistribute into OSPF network, these routes become OSPF ex-
ternal routes. Other routing protocols are RIP and BGP. And static route, connected route,
kernel route are also external route. Those routing information can distribute into OSPF
network.
There are 4 kinds of additional configuration about external routes to OSPF network.
metric is configures Metric value of the default route, metric-type is for type of finding
the path. metric-type 1 uses internal path cost with external path cost as a cost, metric
type 2 always uses external cost value. route-map is transmission of specific routing in-
formation to assigned route which has MAP-NAME, and, tag is using the assign tag num-
ber on the specific MAP-NAME.
Those 4 kinds of additional configuration can be selected more than 2 options without or-
der, and it applies to consistent across all external routes in an attached network.
The following is explaining 4 options of command:
metric <0-16777214>
metric-type <1-2>
route-map MAP-NAME
tag <0-4294967295>
To configure the external route transmission, use the following command.
Command
redistribute { bgp | connected |
kernel | rip | static } metric <0-
16777214>
redistribute { bgp | connected |
kernel | rip | static } metric-type
<1-2>
redistribute { bgp | connected |
kernel | rip | static } route-map
MAP-NAME
redistribute { bgp | connected |
kernel | rip | static } tag <0-
4294967295>
Mode
Configures the period of finding in the unit of second.
SPF-
Router
SPF-DELAY: 0-2147483647 (default: 5)
SPF-HOLD: 0-2147483647 (default: 10)
Mode
Router
Release the configuration.
Mode
Router
Configures the external route transmission.
UMN:CLI
Description
Description
Description
353

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S323Surpass hid 6615 s223Surpass hid 6615 s323 r1.5

Table of Contents