Siemens S223 User Manual page 159

User Manual
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619
Step 2
Set the maximum number of secure MAC address for the port.
Command
port security PORTS maximum
<1-16384>
Step 3
Set the violation mode and the action to be taken.
Command
port security PORTS violation
{ shutdown | protect | restrict }
When configuring port security, note that the following information about port security vio-
lation modes:
protect drops packets with unknown source addresses until you remove a sufficient
•
number of secure MAC addresses to drop below the maximum value.
restrict drops packets with unknown source addresses until you remove a sufficient
•
number of secure MAC addresses to drop below the maximum value and causes the
Security Violation counter to increment.
shutdown puts the interface into the error-disabled state immediately and sends an
•
SNMP trap notification
Step 4
Enter a secure MAC address for the port.
Command
port security PORTS
address MACADDR vlan NAME
To disable the configuration of port secure, use the following command.
Command
no port security PORTS
no port security PORTS mac-
address MACADDR vlan NAME
no port security PORTS maxi-
mum
no port security PORTS viola-
tion
Mode
Sets a maximum number of secure MAC address for
Bridge the port.
1-16384: Maximum number of addresses (default: 1)
Mode
Bridge Selects a violation mode.
Mode
Sets a secure MAC address for the port.
PORTS: select the port number.
mac-
Bridge
MACADDR: enter the MAC address.
NAME: vlan name
Mode
Disables port security on the port.
Deletes a secure MAC address for the port.
PORTS: enter the port number
MACADDR: enter the MAC address.
Bridge
Returns to the default number of secure MAC address.
(default: 1)
Returns to the violation mode to the default. (shutdown
mode)
UMN:CLI
Description
Description
Description
Description
159