Max New Hosts - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.9.1
A50010-Y3-C150-2-7619
Command
max-hosts PORTS <1-16>
no max-hosts PORTS
The following is an example of configuring to allow two MAC addresses to port 3, and five
addresses to port 1, 2, and to ten addresses to port 7.
SWITCH(bridge)# max-hosts 3 2
SWTICH(bridge)# max-hosts 1 5
SWTICH(bridge)# max-hosts 2 5
SWTICH(bridge)# max-hosts 7 10
SWTICH(bridge)#
To display configured max host, use the following command.
Command
show max-hosts
The following is an example of displaying configured max hosts.
SWITCH(bridge)# show max-hosts
port 1 : 0/5
port 2 : 0/5
port 3 : 0/2
port 4 : 0/Unlimited (current/max)
port 5 : 0/Unlimited (current/max)
port 6 : 0/Unlimited (current/max)
port 7 : 0/10
port 8 : 0/Unlimited (current/max)
port 9 : 0/Unlimited (current/max)
port 10 : 0/Unlimited (current/max)

Max New Hosts

Max-new-hosts feature is to limit the number of users by configuring the number of MAC
address that can be learned on the system and on the port for a second. The number of
MAC address that can be learned on the system has the priority.
Mode
Limits the number of connection to a port by setting
maximum host:
PORTS: enter the port number.
Bridge
1-16: enter the maximum MAC number.
Deletes configured max-host, enter the port number.
Mode
Enable
Global Shows configured max host.
Bridge
(current/max)
(current/max)
(current/max)
(current/max)
UMN:CLI
Description
Description
157