UMN:CLI
7.6.4.6
7.6.4.7
154
execution of command, apply. That is, if several rules being different only in one
value should be created, then only the one changed value needs to be entered again.
Modifying and Deleting Rule
To modify a rule, use the following command.
Command
rule NAME modify admin
To delete a rule, use the following command.
Command
no rule admin
no rule all
Displaying Rule
The following command can be used to show a certain rule by its name, all rules of a cer-
tain type, or all rules at once sorted by rule type.
Command
show rule admin
show rule all
show rule statistics
show rule-profile
SURPASS hiD 6615 S223/S323 R1.5
Mode
Global
Modifies an admin access rule, enter a rule name.
Mode
Deletes an admin access rule, enter a rule name op-
tionally.
Global
Deletes all rules and admin access rules.
Mode
Shows all admin access rules sorted by type.
Enable
Shows all rules and admin access rules sorted by type.
Global
Shows rule statistics.
Admin-rule
Shows a current configuration of a rule.
User Manual
Description
Description
Description
A50010-Y3-C150-2-7619