Associating Dhcp Class; Range Of Ip Address For Dhcp Class - Siemens S223 User Manual

UMN:CLI
8.8.2.4
8.8.2.5
!
248
To delete specified option 82 information for IP assignment, use the following command.
Command
no relay-information remote-id ip A.B.C.D [ cir-
cuit-id { hex HEXSTRING | index <0-65535> |
text STRING}]
no relay-information remote-id
STRING [ circuit-id { hex HEXSTRING | index <0-
65535> | text STRING}]
no relay-information remote-id text STRING
[ circuit-id { hex HEXSTRING | index <0-65535> |
text STRING}]
To delete specified option 82 information for IP assignment, use the following command.
Command
no relay-information remote-id all
no relay-information all

Associating DHCP Class

To associate a DHCP class with a current DHCP pool, use the following command.
Command
class CLASS
no class [CLASS]

Range of IP Address for DHCP Class

To specify a range of IP addresses for a DHCP class, use the following command.
Command
address range A.B.C.D A.B.C.D
no address range A.B.C.D
A.B.C.D
A range of IP addresses specified with the address range command is valid only for a
current DHCP pool. Even if you associate the DHCP class with another DHCP pool, the
specified range of IP addresses will not be applicable.
SURPASS hiD 6615 S223/S323 R1.5
Mode
hex HEX-
DHCP
Class
Mode
DHCP
Class
Mode
Associates a DHCP class with a DHCP pool and opens
DHCP Pool Class Configuration mode.
CLASS: DHCP class name
DHCP Pool
Releases an associated DHCP class from a current
DHCP pool.
Mode
Specifies a range of IP addresses.
A.B.C.D: start/end IP address
DHCP Pool
Class
Deletes a specified range of IP addresses.
User Manual
Description
Deletes specified option 82 information
for IP assignment.
Description
Deletes all specified option 82 informa-
tion that contains only a remote ID.
Deletes all specified option 82 informa-
tion.
Description
Description
A50010-Y3-C150-2-7619