Port-Priority; Tab. 8.2 Stp Path-Cost; Tab. 8.3 Rstp Path-Cost - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
8.3.5.4
A50010-Y3-C150-2-7619
Transmit Rate
4M
10M
100M
1G
10G
STP Path-cost
Tab. 8.2
Transmit Rate
4M
10M
100M
1G
10G
RSTP Path-cost
Tab. 8.3
When the route decided by path-cost gets overloading, you would better take another
route. Considering these situations, it is possible to configure path-cost of root port so that
user can configure route manually.
To configure path-cost, use the following command.
Command
stp mst path-cost
MSTID-RANGE PORTS
<1-200000000>
no stp mst path-cost
MSTID-RANGE PORTS

Port-priority

When all conditions of two switches are same, the last standard to decide route is port-
priority. It is also possible to configure port priority so that user can configure route manu-
ally. In order to configure port-priority, use the following command.
Command
stp mst port-priority
MSTID-RANGE PORTS <0-240>
no stp mst port-priority
MSTID-RANGE PORTS
Path-cost
250
100
19
4
2
Path-cost
20,000,000
2,000,000
200,000
20,000
2,000
Mode
Sets the path-cost to configure route:
MSTID_RANGE: select instance number (0-64).
PORTS: select the port number.
Bridge
1-200000000: enter the path cost value.
Deletes the configured path-cost, enter the instance
number and the port number.
Mode
Configures port-priority.
Bridge
Disables port priority configuration.
UMN:CLI
Description
Description
213