Route Map; Force Shutdown - Siemens S223 User Manual

UMN:CLI
10.1.4.3
10.1.4.4
326
To create a BGP Peer Group, use the following command.
Command
neighbor NAME peer-group
no neighbor NAME peer-group
To specify neighbor to the created peer group, use the following command.
Command
neighbor NEIGHBOR-IP
group NAME
no neighbor NEIGHBOR-IP peer-
group NAME

Route Map

You can apply the specific route map on neighboring router that the exchange route in-
formation between routers or blocking the IP address range is configured on route map.
To make BGP Neighbor router exchange the routing information using Route-map, use
the following command.
Command
neighbor {NEIGHBOR-IP |
GROUP} route-map NAME { in |
out }
no neighbor {NEIGHBOR-IP |
GROUP} route-map NAME { in |
out }

Force Shutdown

The hiD 6615 S323 supports the feature to force to shutdown any active session for the
specified BGP router or peer group and to delete the routing data between them. It shut-
downs all connections and deletes the received path information from neighboring router
or peer group.
Mode
Create a BGP peer group.
NAME: peer group name
Router
Delete the BGP peer group created before.
Mode
Includes BGP neighbor to specified peer group using
IP address.
peer-
NEIGHBOR-IP: neighbor IP address
Router
NAME: peer group name
Removes BGP neighbor from the specified Peer
Group.
Mode
Applies a route map to incoming or outgoing routes on
neighboring router or peer group and exchange the
route information.
NEIGHBOR-IP: neighbor IP address
GROUP: peer group name
Router
NAME: route map name
Removes the connection with configured route-map.
SURPASS hiD 6615 S223/S323 R1.5
Description
Description
Description
A50010-Y3-C150-2-7619
User Manual