Displaying Pim-Sm Configuration - Siemens S223 User Manual

UMN:CLI
9.3.11
316
To display the PIM Snooping configuration, use the following command.
Command
show ip pim snooping
show ip pim snooping vlan
VLANS
show ip pim snooping groups
[A.B.C.D]
show ip pim snooping groups
port PORTS
show ip pim snooping groups
vlan [VLANS]

Displaying PIM-SM Configuration

To display the information of PIM-SM configuration, use the following command.
Command
show ip pim bsr-router
show ip pim interface [ detail ]
show ip pim local-members
[INTERFACE]
show ip pim neighbor [ detail ]
show ip pim mroute [A.B.C.D]
show ip pim nexthop
show ip pim rp mapping
show ip pim rp-hash A.B.C.D
SURPASS hiD 6615 S223/S323 R1.5
Mode
Shows the PIM snooping configuration such as en-
able/disable status and the enabled VLANs.
Shows the multicast router address and DR of a speci-
fied VLAN.
Enable
Global
Shows the PIM snooping group, source addresses of a
Bridge
specified VLAN, port or multicast group address.
A.B.C.D : Multicast group address
PORTS: Spedify the logical port number to use
VLANS: VLAN ID (ex : NAME | X | X-Y)
Mode
Shows Bootstrap router (v2).
Shows PIM interface information.
Shows PIM local membership information.
Enable
Shows PIM neighbor information.
Global
Shows PIM master router.
Bridge
Shows PIM next hops.
Shows PIM Rendezvous Point (RP) information.
Shows RP to be chosen based on group selected.
A.B.C.D: group address
User Manual
Description
Description
A50010-Y3-C150-2-7619