Authentication Method; User Manual Umn:cli; Surpass Hid 6615 S223/S323 R1.5; Authentication Interface - Siemens S223 User Manual

UMN:CLI
4.2.1
4.2.2
4.2.3
50

Authentication Method

To set the system authentication method, use the following command.
Command
login {local | remote} {radius |
tacacs | host | all} enable
login {local | remote} {radius |
tacacs | host | all} disable

Authentication Interface

If more than 2 interfaces are specified to the hiD 6615 S223/S323, you can designate one
specific interface to access RADIUS or TACACS server.
To designate an authentication interface, use the following command.
Command
login {radius | tacacs} interface
INTERFACE [A.B.C.D]

Primary Authentication Method

You can set the order of the authentication method with giving the priority to each authen-
tication method. To set the primary authentication method, use the following command
Command
login {local | remote} {radius |
tacacs | host} primary

SURPASS hiD 6615 S223/S323 R1.5

Mode
Set the system authentication method.
local: authentication for console access
remote: authentication for telnet access
radius: selects RADIUS authentication.
tacacs: selects TACACS+ authentication.
Global
host: selects nominal system authentication (default).
all: selects all the authentication methods.
Disables a configured system authentication method.
Mode
Designates an authentication interface.
radius: selects RADIUS authentication.
Global tacacs: selects TACACS+ authentication.
INTERFACE: interface name
A.B.C.D: IP address (optional)
Mode
Set the primary authentication method.
local: authentication for console access
remote: authentication for telnet access
Global
radius: selects RADIUS authentication.
tacacs: selects TACACS+ authentication.
host: selects nominal system authentication (default).
User Manual
Description
Description
Description
A50010-Y3-C150-2-7619