Configuring Security Level - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
4.1.4.2
A50010-Y3-C150-2-7619
To delete the created account, use the following command.
Command
user del NAME
To display the created account, use the following command.
Command
show user

Configuring Security Level

For the hiD 6615 S223/S323, it is possible to configure the security level from 0 to 15 for
a system account. The level 15, as the highest level, has a read-write authority. The ad-
ministrator can configure from level 0 to level 14. The administrator decides which level
user uses which commands in which level. As the basic right from level 0 to level 14, it is
possible to use exit and help command in Privileged EXEC Enable mode and it is not
possible to access to Privileged EXEC Enable mode.
To define the security level and its authority, use the following command.
Command
privilege bgp level <0-15>
{COMMAND | all}
privilege bridge level <0-15>
{COMMAND | all}
privilege configure level <0-15>
{COMMAND | all}
privilege dhcp-option82 level
<0-15> {COMMAND | all}
privilege dhcp-pool level <0-15>
{COMMAND | all}
privilege dhcp-class level
<0-15> {COMMAND | all}
privilege dhcp-pool-class level
<0-15> {COMMAND | all}
privilege enable level <0-15>
{COMMAND | all}
privilege interface level <0-15>
{COMMAND | all}
privilege ospf level <0-15>
{COMMAND | all}
privilege pim level <0-15>
{COMMAND | all}
privilege rip level <0-15>
{COMMAND | all}
Mode
Global Delete the created account.
Mode
Enable/Global Shows the created account.
Mode
Uses the specific command of BGP Configuration mode
in the level.
Uses the specific command of Bridge Configuration
mode in the level.
Uses the specific command of Global Configuration
mode in the level.
Uses the specific command of DHCP Option 82 Con-
figuration mode in the level.
Uses the specific command of DHCP Configuration
mode in the level.
Uses the specific command of DHCP Option 82 Con-
figuration mode in the level.
Global
Uses the specific command of DHCP Configuration
mode in the level.
Uses the specific command of Privileged EXEC mode
in the level.
Uses the specific command of Interface Configuration
mode in the level.
Uses the specific command of OSPF Configuration
mode in the level.
Uses the specific command of PIM Configuration mode
in the level.
Uses the specific command of RIP Configuration mode
in the level.
UMN:CLI
Description
Description
Description
43