Mst Region - Siemens S223 User Manual

UMN:CLI
8.3.5.5
i
i
214

MST Region

If MSTP is established in the hiD 6615 S223/S323, decide which MST region the switch is
going to belong to by configuring MST configuration ID. Configuration ID contains region
name, revision, VLAN map.
To set configuration ID, use the following command.
Command
stp mst config-id name NAME
stp mst config-id map <1-64>
VLAN-RANGE
stp mst config-id revision <0-
65535>
In case of configuring STP and RSTP, you don't need to configure configuration ID. If it is
configured, error message is displayed.
To delete configuration ID, use the following command.
Command
no stp mst config-id
no stp mst config-id name
no stp mst config-id map <1-64>
[VLAN-RANGE]
no stp mst config-id revision
After configuring configuration ID in the hiD 6615 S223/S323, you should apply the con-
figuration to the switch. After changing or deleting the configuration, you must apply it to
the switch. If not, it does not being injected into the switch.
To apply the configuration to the switch after configuring configuration ID, use the follow-
ing command.
Command
stp mst config-id commit
After deleting the configured configuration ID, apply it to the switch using the above com-
mand.
SURPASS hiD 6615 S223/S323 R1.5
Mode
Designate the name for the region:
name: set the MST region name.
NAME: enter name to give the MST region.
Configure the range of VLAN that is going to be group-
ing as a region:
Bridge 1-64: select an instance ID number.
VLAN-RANGE: enter a number of the VLANs to be
mapped to the specified instance.
Configure the switches in the same MST boundary as
same number:
0-65535: set the MST configuration revision number.
Mode
Delete the entire configured configuration ID.
Deletes the name of region, enter the MST region
name.
Bridge
Deletes entire VLAN-map or part of it, select the in-
stance ID number and the number of the VLANs to
remove from the specified instance.
Deletes the configured revision number.
Mode
Bridge Commits the configuration of the region.
User Manual
Description
Description
Description
A50010-Y3-C150-2-7619