Configuration; System; The "Show" Commands; Show Cli-Console-Timeout - Siemens SIMATIC NET Configuration Manual

Configuration

The following is described in this section:
● System settings
● Saving and loading configurations and firmware
3.1

System

This section describes commands with which general system properties can be displayed
and configured.
3.1.1

The "show" commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
3.1.1.1

show cli-console-timeout

Description
This command shows the global configuration for the timeout of the CLI console.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show cli-console-timeout
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
do [command]
[command]
or
cli#
you can execute the "show" commands in every
with the "show" command that you want to execute.
3
35