Siemens S223 User Manual page 44

UMN:CLI
44
Command
privilege rmon-alarm level
<0-15> {COMMAND | all}
privilege rmon-event level
<0-15> {COMMAND | all}
privilege rmon-history level
<0-15> {COMMAND | all}
privilege route-map level
<0-15> {COMMAND | all}
privilege rule level <0-15>
{COMMAND | all}
privilege view level <0-15>
{COMMAND | all}
privilege vrrp level <0-15>
{COMMAND | all}
The commands that are used in low level can be also used in the higher level. For exam-
ple, the command in level 0 can be used in from level 0 to level 14.
The commands should be input same as the displayed commands by show list. There-
fore, it is not possible to input the commands in the bracket separately.
SWITCH# show list
clear arp-inspection mapping counter
clear arp-inspection statistics
clear cpu statistics (PORTS|)
clear ip bgp *
clear ip bgp * in
clear ip bgp * in prefix-filter
clear ip bgp * ipv4 (unicast|multicast) in
clear ip bgp * ipv4 (unicast|multicast) in prefix-filter
clear ip bgp * ipv4 (unicast|multicast) out
clear ip bgp * ipv4 (unicast|multicast) soft
clear ip bgp * ipv4 (unicast|multicast) soft in
clear ip bgp * ipv4 (unicast|multicast) soft out
clear ip bgp * out
clear ip bgp * soft
clear ip bgp * soft in
clear ip bgp * soft out
clear ip bgp * vpnv4 unicast in
clear ip bgp * vpnv4 unicast out
--More--
(Omitted)
It is not possible to input clear ip bgp * ipv4 unicast in. You should input like clear ip
bgp * ipv4 {unicast | multicast} in.
The commands starting with the same character are applied by inputting only the starting
commands. For example, if you input show, all the commands starting with show are
applied.
SURPASS hiD 6615 S223/S323 R1.5
Mode
Uses the specific command of RMON Configuration
mode in the level.
Uses the specific command of RMON Configuration
mode in the level.
Uses the specific command of Route-map Configura-
Global
tion mode in the level.
Uses the specific command of Rule Configuration mode
in the level.
Uses the specific command of User EXEC mode in the
level.
Uses the specific command of VRRP Configuration
mode in the level.
User Manual
Description
A50010-Y3-C150-2-7619