Erp Alarm Severity - Siemens S223 User Manual

UMN:CLI
7.1.9.6
116
Command
snmp alarm-severity adva-if-trans-fault { criti-
cal | major | minor | warning | intermediate }
snmp alarm-severity adva-psu-fail { critical |
major | minor | warning | intermediate }
snmp alarm-severity adva-temperature { critical
| major | minor | warning | intermediate }
snmp alarm-severity adva-voltage-high { criti-
cal | major | minor | warning | intermediate }
snmp alarm-severity adva-voltage-low { critical
| major | minor | warning | intermediate }
If you want to clear a configured ADVA alarm prioirity, use the following command.
Command
no snmp alarm-severity adva-fan-fail
no snmp alarm-severity adva-if-misconfig
no snmp alarm-severity adva-if-opt-thres
no snmp alarm-severity adva-if-rcv-fail
no snmp alarm-severity adva-if-sfp-mismatch
no snmp alarm-severity adva-if-trans-fault
no snmp alarm-severity adva-psu-fail
no snmp alarm-severity adva-temperature
no snmp alarm-severity adva-voltage-high
no snmp alarm-severity adva-voltage-low

ERP Alarm Severity

To configure a severity of alarms for ERP status, use the following command.
Command
snmp alarm-severity erp-domain-lotp { critical |
major | minor | warning | intermediate }
snmp alarm-severity
{ critical | major | minor | warning | intermedi-
ate }
erp-domain-multi-rm
SURPASS hiD 6615 S223/S323 R1.5
Mode Description
Sends alarm notification with the sever-
ity when ADVA informs to fail to transmit
the packets.
Sends alarm notification with the sever-
ity when ADVA informs there's any
problem on the power.
Sends alarm notification with the sever-
ity when ADVA informs there is any
problem in temperature.
Sends alarm notification with the sever-
ity when ADVA informs the voltage is
high.
Sends alarm notification with the sever-
ity when ADVA informs the voltage is
low.
Mode Description
Clears a configured
Global
prioirity.
Mode Description
Sends alarm notification with the sever-
ity when no test packet has been re-
ceived within 3 test packet intervals in
ERP mechanism.
Global
Sends alarm notification with the sever-
ity when a Multiple RM node is created.
A50010-Y3-C150-2-7619
User Manual
ADVA alarm