Basic Configuration; Configuration Type Of Bgp; Enabling Bgp Routing - Siemens S223 User Manual

UMN:CLI
10.1.1
10.1.1.1
i
10.1.1.2
318

Basic Configuration

Configuration Type of BGP

When configuring BGP, you can select BGP configuration type between standard BGP
and ZebOS BGP for the hiD 6615 S323.
The standard BGP is one of the general BGP configuration type, which includes the fol-
lowing restrictions.
•
Manual transmission of community information
You should send the community information or message to neighbors directly using
the neighbor { A.B.C.D | WORD } send-community command.
•
No synchronization
Standard configuration type does not support a synchronization between IGP and
eBGP. In this type, BGP network disables IGP synchronization in BGP by default.
•
No auto-summary
Standard configuration type does not support auto summary feature. By default, the
system disables the automatic network number summarization.
The ZebOS type requires no specific configuration for sending out BGP community and
extended community attributes. ZebOS type is the default for the hiD 6615 S323.
To select configuration type of the BGP router, use the following command.
Command
bgp config-type { standard | ze-
bos }
no bgp config-type

Enabling BGP Routing

Step 1
To define an AS number and open Router Configuration mode, use the following com-
mand.
Command
router bgp <1-65535>
SURPASS hiD 6615 S223/S323 R1.5
Mode
Sets the BGP configuration type between standard and
ZebOS.
Global
Deletes the recent BGP configuration type and returns
to default.
Mode
Assigns AS number to configure BGP routing and
Global opens Router Configuration mode.
1-65535: AS number
User Manual
Description
Description
A50010-Y3-C150-2-7619