Gvrp - D-Link DGS-3130 Series Web Ui Reference Manual

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click L2 Features > VLAN > 802.1v Protocol VLAN > Protocol VLAN Profile
Interface, as shown below:
The fields that can be configured are described below:
Parameter
Port
Profile ID
VID
Priority
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

GVRP

GVRP Global
This window is used to display and configure the global GARP VLAN Registration Protocol (GVRP) settings.
To view the following window, click L2 Features > VLAN > GVRP > GVRP Global, as shown below:
The fields that can be configured are described below:
Parameter
Global GVRP State
Dynamic VLAN Creation
NNI BPDU Address
Figure 5-11 Protocol VLAN Profile Interface Window
Description
Select the stacking unit ID and the port number of the Switch that will be
configured here.
Select the 802.1v protocol VLAN profile ID here.
Enter the VLAN ID used here.
Select the priority value used here. This value is between 0 and 7. This
parameter is specified to re-write the 802.1p default priority previously set in the
Switch, which is used to determine the CoS queue that packets are forwarded
to. Once this field is specified, packets accepted by the Switch that match this
priority are forwarded to the CoS queue specified previously.
Figure 5-12 GVRP Global Window
Description
Select to enable or disable the global GVRP state here.
Select to enable or disable the dynamic VLAN creation function here.
Select the NNI BPDU address option here. This option is used to determine the
BPDU protocol address for GVRP in customer networks. It can use 802.1d
105