Dns Resolver Static Name Server Settings; Dns Resolver Dynamic Name Server Table; Dns Resolver Static Host Name Settings - D-Link DGS-3000 series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
Parameter
DNS Resolver State
Name Server Timeout
(1-60)
Click the Apply button to accept the changes made.

DNS Resolver Static Name Server Settings

The window is used to create the DNS Resolver name server of the switch. When adding a name server, if one
primary name server exists in the static name server table and a new primary name server is added, the existing
primary name server will be changed to a normal name server. If the added primary name server's IP address is
the same as an existing normal name server's IP address, the existing normal name server will be changed to a
primary name server, but won't add new name server. When no primary name server is specified, the first
configured name server will automatically change to become the primary name server. If the deleted name server's
IP address is the same as one of the existing name servers' IP addresses, regardless of whether a normal name
server or primary name server, the name server will be deleted.
To view this window, click Network Application > DNS Resolver > DNS Resolver Static Name Server Settings
as shown below:
The fields that can be configured are described below:
Parameter
Server IP Address
Server IPv6 Address
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.

DNS Resolver Dynamic Name Server Table

This window displays the current DNS Resolver name servers.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Name Server Table
as shown below:

DNS Resolver Static Host Name Settings

Description
Click the radio buttons to enable or disable the DNS resolver state.
The maximum time waiting for a response from a specified name server.
Figure 9-12 DNS Resolver Static Name Server Settings window
Description
Enter a DNS Resolver name server's IPv4 address here. Tick the Primary check
box to set the name server as a primary name server.
Enter a DNS Resolver name server's IPv6 address here. Tick the Primary check
box to set the name server as a primary name server.
Figure 9-13 DNS Resolver Dynamic Name Server Table window
256