xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
DNS Resolver Static Name Server Settings
The window is used to create the DNS Resolver name server of the switch.
To view this window, click Network Application > DNS Resolver > DNS Resolver Static Name Server Settings
as shown below:
The fields that can be configured are described below:
Parameter
Server IP Address
Server IPv6 Address
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
DNS Resolver Dynamic Name Server Table
This window displays the current DNS Resolver name servers.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Name Server Table
as shown below:
DNS Resolver Static Host Name Settings
The window is used to create the static host name entry of the switch.
To view this window, click Network Application > DNS Resolver > DNS Resolver Static Host Name Settings as
shown below:
Figure 9-26 DNS Resolver Static Name Server Settings window
Description
Enter the IP address of the DNS resolver name server. Tick the Primary check box
to set the name server as a primary name server.
Enter the IPv6 address of the DNS resolver name server.
Figure 9-27 DNS Resolver Dynamic Name Server Table window
415