Clearing A Film Jam In The Processor - Kodak EKTASCAN 160 User Manual

Clearing a Film Jam in the Processor

5E2234 June 2000
When a Film Jam occurs, do the following:
From the Main Menu, press "Access Film Supply".
1.
Wait for the indicator to illuminate steady before pro-
ceeding.
Open the Front Door of the Laser Imager.
2.
3. Open the Top Cover.
If necessary, pull the Optics Door Latch out to open
4.
the Optics Door.
Check the film path to locate the jam.
5.
6. Carefully remove the film and check that all the films
are removed from the Laser Imager.
Empty all the film from the Receive Magazine before
7.
inserting the empty Magazine into the Laser Imager.
This will ensure a correct film count in the Receive
Magazine for the next session.
Close the Optics Door.
8.
Close the Top Cover and the Front Door.
9.
10. If the film jam persists, call your local Kodak Service
Representative.
See the User Manual for the KODAK X-OMAT 2000
Processor, Publication Number 7C8770, for more infor-
mation.
Troubleshooting
5-5