Checking Dp Operation; Setting The Presence Or Absence Of A Key Card Or Key Counter; Setting The Presence Or Absence Of The Coin Vender - Kyocera KM-3050 Service Manual

2GN/2GP/2GR-7
Maintenance
item No.

Checking DP operation

U203
Description
Simulates the original conveying operation separately in the optional DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the item to be operated.
4. When selecting [TEST2], to set the magnification using the +/- keys.
Display
TEST 1(NON P)
TEST 2
5. Press the start key. The operation starts.
6. To stop continuous operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Setting the presence or absence of a key card or key counter

U204
Description
Sets the presence or absence of the optional key card or key counter.
Purpose
To run this maintenance item if a key card or key counter is installed.
Method
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Display
KEY-DEVICE
MESSAGE
Setting: KEY-DEVICE
1. Select ON or OFF.
Display
ON
OFF
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Setting: MESSAGE
1. Select the [COUNTER], [CARD] or [COIN].
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Setting the presence or absence of the coin vender

U206
Description
Sets the presence or absence of the optional coin vender. Also sets the details for coin vender operation, such
as mode and unit price.
This is an optional device which is currently supported only by Japanese specification machines, so no setting
is necessary.
1-3-48
Description
Operation
Without paper
With paper
Description
Sets the presence or absence of the key card or key counter
Sets the message when optional equipment is not installed
Description
The key card or the key counter is installed
Not installed
Setting range Initial setting
- -
100 to 200 (%) 100