Using Paper Catalog > Operation When Fiery Controller is Installed
Adjusting the Print Position to Correct Image Drift
If the starting image print position is off, or the starting print positions on the front and back sides are not aligned in two-
sided printing, you can adjust the timing of the starting print position in the direction perpendicular to the paper
movement direction. This is referred to as "Starting Timing Adjustment".
If the center of the printed image does not match the center of the paper, you can move the printed image along the
paper movement direction to align the center of the image with the center of the paper. This is referred to as "Centering
Correction".
IMPORTANT
The print position on paper registered in the Master Paper Catalog cannot be adjusted.
1
2
3
Display the screen.
[System Menu/Counter] key > [Device Settings] > [Paper Feeding] > "Cassette Settings"
[Cassette 1 (to 8) Settings] > [Paper Catalog]
Select the paper brand > [
Items" [Print Chart/Help] > "Print Chart" [Print]
A test chart is printed.
Measure the correct value of front side.
1
Place the chart face printed as "FR" face up.
CT1
FR
LA1
PT1
2
Valley fold the chart along the horizontal line at the top of the chart.
LA1
PT1
] (information icon) > "Adjustment
MS1
LA2
LA2
5-14