Adjusting The Print Start Timing; Adjustment: Leading Edge Registration Adjustment - Kyocera FS-C8520MFP Service Manual

Item No.
U034

Adjusting the print start timing

Description
Adjusts the leading edge registration or center line.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and
original.
Make the adjustment if there is a regular error between the center lines of the copy image and
original.
Method
1. Press the start key.
2. Select the item to be adjusted.
LSU Out Top
LSU Out Left

Adjustment: Leading edge registration adjustment

1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
Display
MPT(L)
Cassette(L)
Duplex(L)
Large size: 218 mm or more in width of paper.
Display
Leading edge registration adjustment
Center line adjustment
Description
Paper feed from MP tray
(when large size paper is used)
Paper feed from cassette
(when large size paper is used)
Duplex mode (second)
(when large size paper is used)
Description
Description
Setting
range
-128 to 127 41
-128 to 127 41
-128 to 127 41
1-3-24
2MY/2MZ
Initial Change in
setting value per step
0.1 mm
0.1 mm
0.1 mm