Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
NOTE:
For console devices, configure the serial port to the following values:
Baud rate—9600
Parity—N
Data bits—8
Stop bits—1
Flow control—none
Using a 2.5-mm flat-blade screwdriver, tighten the screws on the connector.
4.
Attach the other end of the cable to the console or auxiliary device.
5.
Figure 93: Console and Auxiliary Serial Port Connector
Figure 94: Console and Auxiliary Ports on the CIP
Overview of Connecting the T640 Router to External Devices on page 209
Tools and Parts Required to Connect the T640 Router to External Devices on page 210
Chapter 21: Connecting the T640 to External Devices
211