T640 Core Router Hardware Guide
Related
Documentation
T640 LCC-CB LEDs
62
Two configuration switches—
standalone T640 routers.
RJ-45 ports labeled
SFC0
T640 router. Two LEDs for each port—labeled
One JCS port, which is not supported on the T640 router. The
status of the port.
T640 Hardware Component Overview on page 13
T640 Host Subsystem Description on page 35
T640 Control Boards Description
T640 LCC-CB LEDs on page 62
Status LEDs and port LEDs are located on the faceplate of the LCC-CB (see
Figure 24 on page
62).
Figure 24: LCC-CB LEDs
The LEDs located in the middle of the LCC-CB indicate its
describes the functions of the LCC-CB LEDs.
Table 40: LCC-CB LEDs
Label
Color
MASTER
Blue
–
Yellow
FAIL
–
and
—that must be set to
M/S
CHASSIS ID
through
SFC5
, which are not currently supported on the
and
LINK
Link
Activity
LED
LED
State
Description
On steadily
LCC-CB is functioning as the master.
Off
LCC-CB is functioning as the backup.
On steadily
LCC-CB has failed.
Off
No faults have been detected on the LCC-CB.
and
S
0
— are also not supported.
ACT
LED indicates the
LINK
status.Table 40 on page 62
Copyright © 2017, Juniper Networks, Inc.
for