Figure 33: Console And Auxiliary Serial Port Connector - Juniper M7i Hardware Manual

See Also
Related
Documentation
Copyright © 2019, Juniper Networks, Inc.
NOTE:
For console devices, configure the serial port to the following values:
Baud rate—9600
Parity—N
Data bits—8
Stop bits—1
Flow control—none
Tighten the screws on the connector.
3.
NOTE:
For console devices, configure the serial port to the following values:
Baud rate—9600
Parity—N
Data bits—8
Stop bits—1
Flow control—none

Figure 33: Console and Auxiliary Serial Port Connector

Initially Configuring the M7i Router on page 129
Connecting Power to an AC-Powered M7i Router on page 123
Connecting Power to a DC-Powered Router on page 124
Routing Engine Interface Cable and Wire Specifications for the M7i Router on page
M7i Power System Description on page 59
Chapter 18: Connecting the M7i to External Devices
97.
117