Entering Configuration Mode; Configuring User Accounts And Passwords - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide

Entering Configuration Mode

Configuring User Accounts and Passwords

252
NOTE: These procedures enable you to use the
port. For the initial configuration, use a device attached to the
on the CIP.
1. Entering Configuration Mode on page 252
Configuring User Accounts and Passwords on page 252
2.
Configuring System Attributes on page 253
3.
Committing the Configuration on page 254
4.
Verify that the network device is powered on.
1.
Log in as the root user. There is no password.
2.
Amnesiac <ttyd0>
login: root
Start the CLI.
3.
root@% cli
root>
Enter configuration mode.
4.
root> configure
Entering configuration mode.
[edit]
root#
For information about using an encrypted password or an SSH public key string (DSA or
RSA), see Configuring the Root Password and authentication.
Add a password to the root administration user account. Enter a clear-text password.
1.
[edit]
root# set system root-authentication plain-text-password
New password: password
Retype new password: password
Create a management console user account.
2.
[edit]
root# set system login user user-name authentication plain-text-password
New Password: password
Retype new password: password
Set the user account class to
3.
.
super-user
Copyright © 2017, Juniper Networks, Inc.
management
ETHERNET
port
CONSOLE