Replacing The T640 Standard Upper Front Fan Tray; Removing The T640 Standard Upper Front Fan Tray - Juniper T640 Hardware Manual

Core router
Hide thumbs Also See for T640:
Table of Contents

Advertisement

T640 Core Router Hardware Guide
Related
Documentation

Replacing the T640 Standard Upper Front Fan Tray

Removing the T640 Standard Upper Front Fan Tray

288
Tighten the captive screws on each side of the fan tray faceplate to secure it in the
3.
chassis.
Unlock the cable management system and lower it to the fully lowered position.
4.
Rearrange the PIC cables in the cable management system. For more information
5.
about proper cable arrangement, see
page
454.
T640 Cooling System Description on page 31
Maintaining the T640 Fan Trays on page 445
Troubleshooting the T640 Cooling System on page 469
T640 Preventing Electrostatic Discharge Damage on page 506
The upper front fan tray is located above the FPC card cage. Each standard front fan tray
weighs about 18.6 lb (8.4 kg). The fan trays are hot-insertable and hot-removable. The
standard upper and lower fan trays are interchangeable with each other.
Removing the T640 Standard Upper Front Fan Tray on page 288
1.
Installing the T640 Standard Upper Front Fan Tray on page 289
2.
To remove a standard upper front fan tray (see
Attach an electrostatic discharge (ESD) grounding strap to your wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Loosen the captive screws on the corners of the fan tray faceplate.
2.
Grasp the handles and pull the fan tray halfway out of the chassis.
3.
WARNING:
To avoid injury, keep tools and your fingers away from the fans
as you slide the fan tray out of the chassis. The fans might still be spinning.
When the fans stop spinning, place one hand under the fan tray to support it and pull
4.
the fan tray completely out of the chassis.
"Maintaining T640 PICs and PIC Cables" on
Figure 130 on page
289):
Copyright © 2017, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents