Figure 64: Console And Auxiliary Serial Port Connector - Juniper T4000 Hardware Manual
Hide thumbs
Also See for T4000:
- Datasheet (4 pages) ,
- Hardware manual (468 pages) ,
- Quick start manual (40 pages)
Table of Contents
Advertisement
Copyright © 2013, Juniper Networks, Inc.
NOTE:
For console devices, configure the serial port to the following values:
Baud rate—9600
Parity—N
Data bits—8
Stop bits—1
Flow control—none
Using a 2.5-mm flat-blade screwdriver, tighten the screws on the connector.
4.
Attach the other end of the cable to the console or auxiliary device.
5.
Figure 64: Console and Auxiliary Serial Port Connector
Chapter 12: Connecting the T4000 Router to External Devices
113
Advertisement
Table of Contents
Troubleshooting
