T640 Re-600 Description; Host Subsystem Components And Descriptions; Table 11: T640 Supported Routing Engines - Juniper T640 Hardware Manual

Related
Documentation

T640 RE-600 Description

Copyright © 2017, Juniper Networks, Inc.
NOTE: For specific information about Routing Engine components (for
example, the amount of DRAM), issue the
command.
The ports for connecting the Routing Engine to external management devices are located
on the Connector Interface Panel (CIP).
The T640 router supports the Routing Engines listed in

Table 11: T640 Supported Routing Engines

Name
RE-600 (EOL)
"T640 RE-600 Description" on
page 37
RE-1600 (EOL)
"T640 RE-1600 Description" on
page 39
RE-2000
"T640 RE-2000 Description" on
page 44
RE-C1800
"T640 RE-C1800 Description" on
page 42
T640 Hardware Component Overview on page 13
T640 Routing Engine Functions on page 5
Maintaining the T640 Routing Engines on page 448
Each Routing Engine 600 (shown in
components:
Chapter 5: Host Subsystem Components and Descriptions
show chassis routing-engine
Table 11 on page
First Supported Junos OS
Model Number Release
RE-600-2048 5.3
RE-1600-2048 6.2
RE-A-2000-4096 8.1
RE-DUO-C1800-8G 11.2 for standalone T640 routers
RE-DUO-C1800-16G 11.4R2 for standalone T640
routers
13.3R1 for T640 routers
connected to a TX Matrix router.
Figure 18 on page 38) consists of the following
37.
37