Juniper T640 Hardware Manual page 573

Hide thumbs Also See for T640:

Table of Contents

Chapter 42: Electrical Safety Guidelines and Warnings

The intrabuilding ports of the equipment or subassembly are

suitable for connection to intrabuilding or unexposed wiring or cabling only.

The intrabuilding ports of the equipment or subassembly MUST NOT be

metallically connected to interfaces that connect to the Outside Plant (OSP)

or its wiring. These interfaces are designed for use as intrabuilding interfaces

only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and

require isolation from the exposed OSP cabling. The addition of primary

protectors is not sufficient protection in order to connect these interfaces

metallically to OSP wiring.

General Electrical Safety Guidelines and Electrical Codes for Juniper Networks Devices

Documentation

Chapters

Table of Contents