Compliance Statements For Emc Requirements For Juniper Networks Devices (United States); Compliance Statements For Environmental Requirements For Juniper Networks; Devices; T640 Compliance Statements For Nebs - Juniper T640 Hardware Manual

Core router
Hide thumbs Also See for T640:
Table of Contents

Advertisement

T640 Core Router Hardware Guide
Related
Documentation
Compliance Statements for EMC Requirements for Juniper Networks Devices (United
States)
Related
Documentation
Compliance Statements for Environmental Requirements for Juniper Networks Devices

T640 Compliance Statements for NEBS

Related
Documentation
544
The hardware equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Batteries in this product are not based on mercury, lead, or cadmium substances. The
batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC,
and 98/101/EEC. The product documentation includes instructional information about
the proper method of reclamation and recycling.
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installations in Network Telecommunication Facilities.
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (DC-I), as defined
in GR-1089-CORE.
For Juniper systems with AC power supplies, an external surge protective device (SPD)
must be used at the AC power source.
T640 Agency Approvals on page 541
General Safety Guidelines for Juniper Networks Devices on page 503
General Safety Warnings for Juniper Networks Devices on page 504
Copyright © 2017, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents