Connecting To A Network For Out-Of-Band Management; Connecting To A Management Console Or Auxiliary Device; Figure 23: Routing Engine Ethernet Cable Connector; Figure 24: Console And Auxiliary Serial Port Connector - Juniper M10i Hardware Manual

M10i Internet Router Hardware Guide

Connecting to a Network for Out-of-Band Management

To connect the Routing Engine to a network for out-of-band management, connect
an Ethernet cable with RJ-45/RJ-45 connectors to the
Engine. One such cable is provided with the router. For cable specifications, see
"Cable Specifications for Routing Engine Management Interfaces"
this procedure:
1.
2.
3.

Figure 23: Routing Engine Ethernet Cable Connector

Connecting to a Management Console or Auxiliary Device

To use a system console to configure and manage the Routing Engine, connect it to
the
device, connect it to the appropriate
ports accept an RS-232 (EIA-232) serial cable with DB-9/DB-9 connectors. One such
cable is provided with the router. If you want to connect a device to both ports, you
must supply another cable. See
Interfaces"
this procedure:
1.
2.
3.
4.

Figure 24: Console and Auxiliary Serial Port Connector

60
Connecting the Router to Management Devices
Connecting to a Management Console or Auxiliary Device
Turn off the power to the management device.
Plug one end of the Ethernet cable (
port on the Routing Engine (see
Plug the other end of the cable into the network device.
CONSOLE port on the Routing Engine. To use a laptop, modem, or other auxiliary
on page 187. To connect a management console or auxiliary device, follow
Turn off the power to the console or auxiliary device.
Plug the female end (shown in
or
CONSOLE AUX/MODEM
Using a 2.5 mm flat-blade screwdriver, tighten the screws on the connector.
Attach the other end of the cable to the console or auxiliary device.
MGMT
Figure 23 shows the connector) into the
).
Figure 22
port on the Routing Engine. Both
AUX/MODEM
"Cable Specifications for Routing Engine Management
Figure 24 ) of the provided console cable into the
port (see ).
Figure 22
on page 60
port on the Routing
on page 187. Follow
MGMT