Tx Matrix Plus (With 3D Sibs) Routing Engines; T640 Lcc-Cb Description; Figure 23: Lcc-Cb; Table 38: Tx Matrix Plus Routing Engines - Juniper T640 Hardware Manual

Table 38: TX Matrix Plus Routing Engines

Name in CLI
Model Number Output
RE-DUO-C2600-16G RE-TXP-SFC
RE-DUO-2600

TX Matrix Plus (with 3D SIBs) Routing Engines

Table 39: Routing Engines on TX Matrix Plus with 3D SIBs

Name in CLI
Model Number Output
RE-DUO-C2600-16G
RE-TXP-SFC
RE-DUO-2600
Related
Documentation

T640 LCC-CB Description

Copyright © 2017, Juniper Networks, Inc.
First Supported
32-bit Junos OS
Release
or 32-bit Junos OS: 9.6
Table 39 on page 61 lists the Routing Engines supported by the TX Matrix Plus router
with 3D SIBs.
First Supported
32-bit Junos OS
Release
or -
Routing Engine Specifications on page 46
Understanding Internal Ethernet Interfaces
Understanding Management Ethernet Interfaces
Each LCC-CB consists of the following components:
100-MB Ethernet switch for intermodule communication.
PCI bus to the Routing Engines.
Switch processor mezzanine board (SPMB).
Figure 23 on page 61 shows the LCC-CB.

Figure 23: LCC-CB

The following components are located on the LCC-CB faceplate:
Three LEDs labeled
MASTER
The online/offline button.
Chapter 5: Host Subsystem Components and Descriptions
First Supported Management
64-bit Junos OS Ethernet
Release Interface
64-bit Junos OS: 11.4 em0
First Supported Management
64-bit Junos OS Ethernet
Release Interface
64-bit Junos OS: 11.4 em0
, , and indicate its status.
FAIL OK
Internal
Ethernet
Interface
ixgbe0
ixgbe1
Internal
Ethernet
Interface
ixgbe0
ixgbe1
61