Configuring The State Analyzer - HP 1652B Getting Started Manual

Configuring the
Now that you have configured the system, you are ready to configure
State Analyzer
the state analyzer. Set the State Format Specification menu as shown in
figure
27-3.
For this example, the labels ADDR, DATA, and STAT are
chosen for you to describe address lines, data lines and CPU status.
piE----j-
Stale Format Specification
Speclly Symbols
Cl OCk
,
i J1 1
Ilock P~rlod
j>6:1]
Activity >
-Off-
-Of I-
-Off-
~
-Of t-
-Of f-
-Off-
-Of I-
I -Off-J
Pocl 2 Pod 1
f
TTL
I
Clock
1M
I
Bit Assignment Fields
Figure
27-3.
Configure the State Format Menu
1. Press FORMAT key on front panel.
2. Select Pod 2 (ADDR) bit assignment field and turn bits 0 through
15 on. These are the address lines.
3. Select Pod 1 (DATA) bit assignment field and turn bits 0 through
7 on. These are the data lines.
4. Select Pod 1 (STAT) bit assignment field and turn bit 8 on. This is
the CPU Read/Write line.
Timing/State/Scope Measurement Example
27-4
HP 1652B/16538
Front-Panel Reference