Specifications And Operating Characteristics; Introduction; Logic Analyzer Specifications; Probes - HP 1652B Getting Started Manual

,-
Specifications and Operating
Characteristics
Introduction
This appendix lists the specifications, operating characteristics, and
supplemental characteristics of the HP 1652B and HP 1653B Logic
Analyzers.
Logic Analyzer
Specifications
Probes
Minimum Swing: 600 mV peak-to-peak.
Threshold Accuracy:
OltageBange
-2.OV to + 2.ov
-9.9v to -2.lV
+ 2.1v to + 9.9v
Dynamic Range: t 10 volts about the threshold.
CCUfaCV
k 150 mV
*3OOmV
&3OOmV
State
Mode
Clock Repetition Rate: Single phase is 35 MHz maximum (25 MHz on
the HP 1653B). With time or state counting, minimum time between
states is 60 ns (16.67 MHz). Both mixed and demultiplexed clocking
use master-slave clock timing; master clock must follow slave clock by
at least 10 ns
and
precede the next slave clock by 150 ns.
Clock Pulse Width: ~10 ns at threshold.
Setup Time: Data must be present prior to clock transition, 2 10 ns.
Hold Time: Data must be present after rising clock transition; 0 ns.
HP 16528/1653B
Specifications and Operating Characteristics
Front-Panel Reference
F-l