If the amount of data on the source disk exceeds the available memory
in the logic analyzer, the logic analyzer will display "Insert the source
disk-hit select when ready" again, and you will need to repeat the
process of inserting the source disk, then the destination disk. Follow
the directions on screen until the entire disk is duplicated.
When the entire disk is duplicated, you will see "Hit FORMAT key to
copy another disk or insert system disk and hit SELECT to reboot." If
you are finished duplicating disks, insert the system disk and press
SELECT. The logic analyzer will load the system file and return you to
the System Configuration menu.
HP 16528/1653B
Front-Panel Reference
Disk Drive Operations
049