3
,--
Using the Front-Panel User Interface
. Introduction
This chapter explains how to use the front-panel user interface. The
front and rear-panel controls and connectors are explained in the first
part of this chapter followed by "How to use..." explanations of the
front-panel user interface.
The front-panel user interface consists of front-panel keys, the KNOB,
and display. The interface allows you to configure the logic analyzer,
oscilloscope and each analyzer (machine) within the logic analyzer. It
also displays acquired data and measurement results.
Using the front-panel user interface involves the following processes:
l
Selecting the desired menu with the menu keys.
l
Placing the cursor on the desired field within the menu by'
rotating the KNOB.
l
Displaying the field options or current data by pressing the
SELECT-key.
l
Selectingthe desired option by rotating the KNOB or entering
new data by using the KNOB or the keypad.
l
Starting and stopping data acquisition by using the RUN and
STOP keys.
-
HP
16526/1653B
Using the Front-Panel User Interface
Front-Panel Reference
3-l