Table of Contents
Advertisement
-
HP 1652BD653B
Front-Panel Reference
d. Name the second label CAS by repeating steps a through c.
3. Assign the channels connected to the input signals (Pod 1 bits 0 and
1) to the labels RAS and CAS respectively.
a. Place the cursor on the bit assignment field below Pod 1 and to
the right of RAS and press SELECT.
b . Any combination of bits may be assigned to this pod; however,
you will want only bit 0 assigned to the RAS label. The easiest way
to assign bits is to press the CLEAR ENTRY key to un-assign any
assigned bits before you start.
c. Place the cursor on the period under the 0 in the bit assignment
pop-up and press SELECT . This will place an asterisk in the
pop-up for bit 0 indicating Pod 1 bit 0 is now assigned to the RAS
label. Place cursor on Done and press SELECT to close the
POP-UP-
d . Assign Pod 1 bit 1 to the CAS label by moving the cursor to bit 1
and pressing SELECT.
Timing Analyzer Measurement Example
20-7
Advertisement
Chapters
Table of Contents
