HP 1652B Getting Started Manual page 435

3. Select the Done field to return to the waveform display.
Waveforms Menu HP 16528/1653B
25-26
Front-Panel Reference
The X marker is on the falling edge of the 2nd displayed pulse and the
0 marker is on the rising edge of the 5th displayed pulse. See figure
25-23.
[Scope}- hvef ors Specifu flarkers ,
tlarker
s 1 Search ] Display [Normal] Connect dots 1x1
X-pattern 171 from stbrt O-pattern [5] from start
s/Dlv
pz?rEq Delay
I
Grla Iar']
x
0
\
I
8
K -144mV
-
- -144mV -:
Figure
25-23.
Search Marker Measurement Waveform
4. Select the Markers field and switch from Search to Statistics.
Notice the statistical minimum, maximum, and mean time interval
measurements between the X and the 0 markers are also
displayed. The voltage measurements of where the markers
intersect the waveforms are displayed under the CH
1
and CH 2
channel labels.
5. Select the Delay field, and turn the knob. Notice that as the
waveform is moved across the display, the X and 0 markers also
move to the edges specified in the Search Markers pop-up menu.
6. Set the Delay time back to 0 s.