Delay Field - HP 1652B Getting Started Manual

Delay Field
The Delay field allows you to enter a delay. The delay can be either
positive or negative. Delay allows you to place the time window
(selected by Time/Div) of the acquired data at center screen.
-
HP 1652B/1653B
Timing Waveforms Menu
Front-Panel Reference
19-9
The inverted triangle in the horizontal center of the waveforms area of
the display represents trigger + delay. The vertical dotted line
represents the trigger point (see figure 19-11).
liming Mwcf ofms
I
narkers I]
Accumulate
fort]
flme/Dlv 1-1
x to Trig
0 to Trig
Delay
I-9001
16301
i
1 Time X to 0 J
fit WJ
0
1.530
us
(CLOCK]
Figure 19-11. Trigger and Trace Points
If you want to trace after the trigger point, enter a positive delay. If you
want to trace before the trigger point (similar to negative time) enter a
negative delay. The logic analyzer is capable of maximum delays of
- 2500 seconds to + 2500 seconds. In Transitional mode the maximum
delay is determined by the number of transitions of the incoming data.
Data may not be displayed at all settings of Time/Div and Delay.